General Hardware Specifications of Lifebook S 7110:
|
Hardware Components
|
Status under Linux
|
Notes
|
| Intel Core 2 Duo T5200 | Works | No special procedure required during installation. |
| 14.1 XGA TFT Display | Works | Select Generic LCD Display in Installer |
| Nvidia GEForce 7300 | Works | Follow this article |
| 1 GB RAM | Works | No special procedure required during installation |
| 120 GB SATA Hard Drive | Works | No special procedure required during installation |
| Internal Intel Wireless Networking (Wi-Fi Certified) | Works | With ipw3945 driver: Follow this article |
| Integrated Network Card | Works | You need kernel >= 2.6.19 Special procedure required during installation. Read below for more details |
| Internal 56k Modem | Not Tested | In progress |
| CD-RW DVD-RW Drive | Works | No special procedure required during installation |
| IrDA | Not Tested | In progress |
| Intel High Definition Audio Controller | Works | You need Kernel 2.6.x.
Special procedure required during installation. |
| USB | Works | No special procedure required during installation |
| ACPI e tasti funzione | Works | Special procedure required during installation. Follow this article |
| PCMCIA/PCCARD | Not tested | In Progress |
| FireWire/IEEE1394 | Work | No special procedure required during installation |
| Card Reader | Works | Special procedure required during installation. Read below for more details |
| Battery | Works | No special procedure required during installation |
| Webcam | Works | Special procedure required during installation. Read below for more details |
This laptop is operating under Kernel version 2.6.21
installazione di Fedora 7:
Utili repository per Fedora core 7
Sound System – Audio
After installation i cannot hear audio.
The default conf do not work.
I have changed my modprobe.conf
(see below) and everything work correctly.
[root@trinity2 ~]# cat /etc/modprobe.conf
alias eth0 r8169
alias scsi_hostadapter ata_piix
alias snd-card-0 snd-hda-intel
alias sound-slot-0 snd-hda-intel
options snd-hda-intel model=3stack
options snd-card-0 index=0
Webcam
On my Asus Z99Jseries (like a A8JN)
to make webcam work you have to install this software:
http://mxhaard.free.fr/spca50x/Download/gspcav1-20070508.tar.gz
This is the home page:
http://mxhaard.free.fr/download.html
You have to follow this steps:
wget http://mxhaard.free.fr/spca50x/Download/gspcav1-20070508.tar.gz
tar -zxvf gspcav1-20070508.tar.gz
cd gspcav1-20070508
make
make install
modprobe gspca
Now it work perfectly.
You can try it with vlc
If your image should be strange and with bad color change your
/etc/modprobe.conf :
add this line
options gspca force_rgb=1
else, if your image is too dark, try this line:
options gspca force_rgb=0 gamma=4
when you have a change reload the module before retry
modprobe -r gspca
modprobe gspca
You can change on the fly the gspca parameter here
cd /sys/module/gspca/parameters
autoexpo
compress
debug
force_rgb
gamma
GBlue
GGreen
GRed
lightfreq
OffBlue
OffGreen
OffRed
usbgrabber
to read them you can usa a cat
to change them use this:
echo “value” > parameter
this is a little description:
autoexpo:Enable/Disable auto exposure (default=1: enabled) (PC-CAM 600/Zc03xx/spca561a/Etoms Only !!!) (int)
debug:Debug level: 0=none, 1=init/detection, 2=warning, 3=config/control, 4=function call, 5=max (int)
force_rgb:Read RGB instead of BGR (int)
gamma:gamma setting range 0 to 7 3-> gamma=1 (int)
OffRed:OffRed setting range -128 to 128 (int)
OffBlue:OffBlue setting range -128 to 128 (int)
OffGreen:OffGreen setting range -128 to 128 (int)
GRed:Gain Red setting range 0 to 512 /256 (int)
GBlue:Gain Blue setting range 0 to 512 /256 (int)
GGreen:Gain Green setting range 0 to 512 /256 (int)
compress:Turn on/off compression (not functional yet) (int)
usbgrabber:Is a usb grabber 0x0733:0x0430 ? (default 1) (int)
lightfreq:Light frequency banding filter. Set to 50 or 60 Hz, or zero to NoFliker (default=50) (int)
Card Reader
Every info from:
http://gentoo-wiki.com/HOWTO_SD_and_MMC_card_readers
Lan
Driver only included in newer Kernels (RTL8168b/8111b), Module name “r8169” or alternatively the proprietary Realtek-driver “r1000“.
I recommend to use the build in kernel driver, because it’s making less trouble during an upgrade and it’s working as it should.
TouchPad
Synaptics Touchpad, works with the dafualt configuration obtained after installation (including scrollbars)
ACPI
modprobe asus-laptop
load the correct module, but i had good experience with slackware and
http://sourceforge.net/projects/acpi4asus
Installare Flash Palyer su Fedora Core 7
Installare True Type Font su Fedora Core 7
Installare RealPlayer su Fedora Core 7
Installare Adobe Reader su Fedora Core 7
Multimedia-Codecs su Fedora Core 7
Fedora 7 java runtime engine jre e java development kit jdk e firefox plugin
Abilitare Frame Buffer a 1024×768 su Fedora Core 7
More Specific Information. Specific stuff such as:
- lspci
[root@trinity2 ~]# lspci
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:01.0 PCI bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express PCI Express Root Port (rev 03)
00:1b.0 Audio device: Intel Corporation 82801G (ICH7 Family) High Definition Audio Controller (rev 02)
00:1c.0 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 1 (rev 02)
00:1c.2 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 3 (rev 02)
00:1c.3 PCI bridge: Intel Corporation 82801G (ICH7 Family) PCI Express Port 4 (rev 02)
00:1d.0 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #1 (rev 02)
00:1d.1 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #2 (rev 02)
00:1d.2 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #3 (rev 02)
00:1d.3 USB Controller: Intel Corporation 82801G (ICH7 Family) USB UHCI Controller #4 (rev 02)
00:1d.7 USB Controller: Intel Corporation 82801G (ICH7 Family) USB2 EHCI Controller (rev 02)
00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2)
00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02)
00:1f.2 IDE interface: Intel Corporation 82801GBM/GHM (ICH7 Family) SATA IDE Controller (rev 02)
01:00.0 VGA compatible controller: nVidia Corporation G72M [Quadro NVS 110M/GeForce Go 7300] (rev a1)
02:00.0 Network controller: Intel Corporation PRO/Wireless 3945ABG Network Connection (rev 02)
03:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 01)
06:00.0 FireWire (IEEE 1394): Ricoh Co Ltd R5C832 IEEE 1394 Controller
06:00.1 Generic system peripheral [0805]: Ricoh Co Ltd R5C822 SD/SDIO/MMC/MS/MSPro Host Adapter (rev 19)
06:00.2 System peripheral: Ricoh Co Ltd Unknown device 0843 (rev 01)
06:00.3 System peripheral: Ricoh Co Ltd R5C592 Memory Stick Bus Host Adapter (rev 0a)
06:00.4 System peripheral: Ricoh Co Ltd xD-Picture Card Controller (rev 05)
[root@trinity2 ~]#
- lsusb
[root@trinity2 ~]# lsusb
Bus 003 Device 001: ID 0000:0000
Bus 002 Device 001: ID 0000:0000
Bus 001 Device 002: ID 093a:2500 Pixart Imaging, Inc.
Bus 001 Device 001: ID 0000:0000
Bus 005 Device 001: ID 0000:0000
Bus 005 Device 002: ID 0ac8:0321 Z-Star Microelectronics Corp.
Bus 004 Device 001: ID 0000:0000
[root@trinity2 ~]#
- e-mail address: mao17[at]katamail[dot]com
